PRODUCTS
As a manufacturer of different types of escalator and elevators parts
BE-G3SE4
Technical Data | |
Output Mode | PNP output |
Detection Distance (groove width) | 23mm |
Standard Testing Objects | Opaque more than ? 1.5mm |
Light Source (Wavelength) | IR LED(850-940nm) |
Supply Voltage | DC12~24V ±10 ％ Ripple (p-p) ＜ 10 ％ |
Current Consumption | ＜ 40mA |
Control Output | Load supply voltage is lower than DC26.4V, load current is lower than 100mA (the remaining voltage is lower than 1V) NPN Open type output Light in: ON/Shading: ON Switch mode |
Protective Circuit | Power reverse connection protection |
Response Time | Action ＜ 1ms Reset ＜ 1ms |
Working Ambient Temperature | Receives illumination: Filament Lamp ≤ 3,000lx; Sunlight ≤ 10,000lx |
Ambient Temperature | Work:-25~+55 C, Storage: -40~+70 C (non-freezing, non-condensing) |
Ambient Humidity | Work: 35~85 ％ RH, Storage: 35~95 ％ RH (non-condensing) |
Dielectric Resistance | 20M Ω (DC500V Megger) between whole conductor and the shell |
Voltage Withstand | AC1,000V 50/60Hz 1min between whole conductor and the shell |
Vibration(Endurance) | 10~55Hz Amplitude fluctuation 1.5mm 2hs X, Y, Z each direction |
Impact(Endurance) | 500m/s2 X, Y, Z each direction three times |
IP Code | IEC Standard IP54 |
Connection Type | Wire Leads Type (Standard Lead Length 2m/500mm) |
Indicator Lamp | Action Indicator (Red) |
Gross Weight | ≈ 100g |
Wiring Mode | Red: Power Supply +/- Black: Power Supply -/+ Yellow: Output OUT |